Showing Results for
All Journals
Engineering
Wind and Structures
A revised Hermite peak factor model for non-Gaussian wind pressures on high-rise buildings and comparison of methods
by Dongmei Huang
+ 1 others
0
$0.00
Engineering
Wind and Structures
Research of the impact of material and flow properties on fluid-structure interaction in cage systems
by Mehmet Emin Özdemir and Murat Yaylac
0
$0.00
Engineering
Wind and Structures
Study on the size reduction factor of extreme wind pressure of facade cladding of high-rise buildings with square section
by Xiang Wang
+ 2 others
0
$0.00
Engineering
Wind and Structures
Modal parameter identification of civil structures using symplectic geometry mode decomposition
by Feng Hu
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Effects of structural characteristics of screw conveyor on spewing during EPB shield tunnelling
by Xiaochun Zhong
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Earthquake hazard and risk assessment of a typical Natural Gas Combined Cycle Power Plant (NGCCPP) control building
by A. Can Zülfikar
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
An analytical solution for compaction grouting problem considering exothermic temperature effect of slurry
by Chao Li
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
The responses of battered pile to tunnelling at different depths relative to the pile length
by Mukhtiar Ali Soomro
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Three-dimensional numerical parametric study of deformation mechanisms of grouped piled raft foundation due to horizontal loading
by Bo Wang
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
The influence of fine particle migration on pore structure of overlying ballast under cyclic loading
by Yu Ding
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Propagation behaviors of guided waves in graphene platelet reinforced metal foam plates
by Wubin Shan
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Prediction of TBM disc cutter wear based on field parameters regression analysis
by Lei She
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Influence of clamped-clamped boundary conditions on the mechanical stress, strain and deformation analyses of cylindrical sport equipment
by Yuhao Yang and Mohammad Arefi
0
$0.00
Engineering
Geomechanics and Engineering A
Effects of normal stress, shearing rate, PSD and sample size on behavior of ballast in direct shear tests using DEM simulation
by Md Hussain and Syed Khaja Karimullah Hussaini
0
$0.00
Engineering
Geomechanics and Engineering A
Full-scale TBM excavation tests for rock-like materials with different uniaxial compressive strength
by Gi-Jun Lee
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Application of deterministic models for obtaining groundwater level distributions through outlier analysis
by Dae-Hong Min
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
The thickness of the soft soil layer and canal-side road failure: A case study in Phra Nakhon Si Ayutthaya province, Thailand
by Salisa Chaiyaput
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Mechanical evolution law and deformation characteristics of preliminary lining about newly-built subway tunnel closely undercrossing the existing station: A case study
by Huijian Zhang
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
Empirical correlation for in-situ deformation modulus of sedimentary rock slope mass and support system recommendation using the Qslope method
by Yimin Mao
+ 2 others
0
$0.00
Engineering
Geomechanics and Engineering A
The role of wall configuration and reinforcement type in selecting the pseudo-static coefficients for reinforced soil walls
by Majid Yazdandoust
+ 1 others
0
$0.00