Geomechanics and Engineering A
Volume 17, Number 5, 2019, pages 445-452
DOI: 10.12989/gae.2019.17.5.445
Laboratory triaxial test behavior of xanthan gum biopolymer-treated sands
Sojeong Lee, Jooyoung Im, Gye-Chun Cho and Ilhan Chang
Abstract
Gel-type biopolymers have recently been introduced as environmentally friendly soil binders and have shown substantial strengthening effects in laboratory experimental programs. Although the strengthening effects of biopolymer-treated sands have been verified in previous direct shear tests and uniaxial compression tests, there has been no attempt to examine shear behavior under different confining stress conditions. This study therefore aimed to investigate the strengthening effects of biopolymer-treated sand using laboratory triaxial testing with a focus on confining pressures. Three representative confining pressure conditions (sigma3=50 kPa, 100 kPa, and 200 kPa) were tested with varying biopolymer contents (mbp/ms) of 0.5%, 1.0%, and 2.0%, respectively. Based on previous studies, it was assumed that biopolymer-treated sand is susceptible to hydraulic conditions, and therefore, the experiments were conducted in both a hydrated xanthan gum condition and a dehydrated xanthan gum condition. The results indicated that the shear resistance was substantially enhanced and there was a demonstrable increase in cohesion as well as the friction angle when the biopolymer film matrix was comprehensively developed. Accordingly, it can be concluded that the feasibility of the biopolymer treatment will remain valid under the confining pressure conditions used in this study because the resisting force of the biopolymer-treated soil was higher than that in the untreated condition, regardless of the confining pressure.
Key Words
biopolymer; hydrogel-type biopolymer; triaxial testing; shear behavior
Address
Sojeong Lee and Ilhan Chang: School of Engineering and Information Technology (SEIT), University of New South Wales (UNSW), Northcott Drive, Campbell, ACT, 2600, Australia
Jooyoung Im and Gye-Chun Cho: Department of Civil Engineering, Korean Advanced Institute for Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea