Geomechanics and Engineering

Volume 11, Number 6, 2016, pages 739-756

DOI: 10.12989/gae.2016.11.6.739

A modified shear strength reduction finite element method for soil slope under wetting-drying cycles

Yiliang Tu , Zuliang Zhong , Weikun Luo , Xinrong Liu , Sui Wang

Abstract

The shear strength reduction finite element method (SSRFEM) is a powerful tool for slope stability analysis. The factor of safety (FOS) of the slope can be easily calculated only through reducing effective cohesion (c') and tangent of effective friction angle (tanφ') in equal proportion. However, this method may not be applicable to soil slope under wetting-drying cycles (WDCs), because the influence of WDCs on c' and tanφ' may be different. To research the method of estimating FOS of soil slopes under WDCs, this paper presents an experimental study firstly to investigate the effects of WDCs on the parameters of shear strength and stiffness. Twelve silty clay samples were subjected to different number of WDCs and then tested with triaxial test equipment. The test results show that WDCs have a degradation effect on shear strength (σ1 – σ3)f, secant modulus of elasticity (Es) and c' while little influence on φ'. Hence, conventional SSRFEM which reduces c' and tanφ' equal proportion cannot be adopted to compute the FOS of slope under conditions of WDCs. The SSRFEM should be modified. In detail, c' is merely reduced among shear strength parameters, and elasticity modulus is reduced correspondingly. Besides, a new approach based on sudden substantial changes in the displacement of marked nodes is proposed to identify the slope failure in SSRFEM. Finally, the modified SSRFEM is applied to compute the FOS of a slope example.

Key Words

wetting-drying cycles; shear strength reduction finite element method; modification; factor of safety; soil slope

Address

PDF Viewer

Preview is limited to the first 3 pages. Sign in to access the full PDF.

Loading…