Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory

Kada Draiche , Abdelmoumen Anis Bousahla , Abdelouahed Tounsi , Afaf S. Alwabli , Abdeldjebbar Tounsi , S.R. Mahmoud

Abstract

This paper aims to present an analytical model to predict the static analysis of laminated reinforced composite plates subjected to sinusoidal and uniform loads by using a simple first-order shear deformation theory (SFSDT). The most important aspect of the present theory is that unlike the conventional FSDT, the proposed model contains only four unknown variables. This is due to the fact that the inplane displacement field is selected according to an undetermined integral component in order to reduce the number of unknowns. The governing differential equations are derived by employing the static version of principle of virtual work and solved by applying Navier\'s solution procedure. The non-dimensional displacements and stresses of simply supported antisymmetric cross-ply and angle-ply laminated plates are presented and compared with the exact 3D solutions and those computed using other plate theories to demonstrate the accuracy and efficiency of the present theory. It is found from these comparisons that the numerical results provided by the present model are in close agreement with those obtained by using the conventional FSDT.

Key Words

static bending; simple FSDT; displacement field; cross-ply; angle-ply laminated plates

Address

Kada Draiche — Departement de Genie Civil, Universite Ibn Khaldoun Tiaret, BP 78 Zaaroura, 14000 Tiaret, Algeria; Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department, Algeria
Abdelmoumen Anis Bousahla — Laboratoire de Modelisation et Simulation Multi-echelle, Universite de Sidi Bel Abbes, Algeria; Centre Universitaire de Relizane, Algeria; Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Eastern Province, Saudi Arabia
Abdelouahed Tounsi — Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department, Algeria; Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Eastern Province, Saudi Arabia
Afaf S. Alwabli — Department of Biology, Faculty of Sciences, King Abdulaziz University, Jeddah, Saudi Arabia
Abdeldjebbar Tounsi — Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department, Algeria
S.R. Mahmoud — GRC Department, Jeddah Community College, King Abdulaziz University. Jeddah, Saudi Arabia

PDF Viewer

Preview is limited to the first 3 pages. Sign in to access the full PDF.

← Back to Volume 24, No. 4