Wind and Structures
Volume 23, Number 6, 2016, pages 559-575
DOI: 10.12989/was.2016.23.6.559
Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade
Shitang Ke, Wei Yu, Tongguang Wang, Lin Zhao and Yaojun Ge
Abstract
In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in 350 to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in 330 under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.
Key Words
wind turbine tower; blade position; large eddy simulation; aerodynamic load; wind-induced response
Address
Shitang Ke: Jiangsu Key Laboratory of Hi-Tech Research for Wind Turbine Design, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China
Wei Yu and Tongguang Wang: Jiangsu Key Laboratory of Hi-Tech Research for Wind Turbine Design, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Lin Zhao and Yaojun Ge: State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China