Smart Structures and Systems

Volume 28, Number 1, 2021, pages 1-12

DOI: 10.12989/sss.2021.28.1.001

Damage detection in structures using Particle Swarm Optimization combined with Artificial Neural Network

L. Nguyen-Ngoc, H. Tran-Ngoc, T. Bui-Tien, A. Mai-Duc, M. Abdel Wahab, Huan X. Nguyen and G. De Roeck

Abstract

In this paper, a novel approach to damage identification in structures using Particle Swarm Optimization (PSO) combined with Artificial neural network (ANN) is proposed. With recent substantial advances, ANN has been extensively utilized in a wide variety of fields. However, because of the application of backpropagation algorithms based on gradient descent techniques, ANN may be trapped in local minima when seeking the best solution. This may reduce the accuracy of ANN. Therefore, we propose employing an evolutionary algorithm, namely PSO to deal with the local minimum problems of ANN. PSO is employed to improve the training parameters of ANN consisting of weight and bias ratios by reducing the deviation between calculated and desired results. These training parameters are then used to train the network. Since PSO applies global search techniques to look for the best solution, it can assist the network in avoiding local minima by looking for a beneficial starting point. In order to assess the effectiveness of the proposed approach, both numerical and experimental models with different damage scenarios are employed. The results show that ANN -PSO not only significantly reduces computational time compared to PSO but also possibly identifies damages in the considered structures more accurately than ANN and PSO separately.

Key Words

Artificial Neural Network (ANN); damage identification; local minima; Particle Swarm Optimization (PSO); training parameters

Address

(1) L. Nguyen-Ngoc, H. Tran-Ngoc, T. Bui-Tien, A. Mai-Duc: Department of Bridge and Tunnel Engineering, Faculty of Civil Engineering, University of Transport and Communications, Hanoi, Vietnam; (2) H. Tran-Ngoc: Department of Electrical Energy, Metals, Mechanical Constructions, and Systems, Faculty of Engineering and Architecture, Ghent University, 9000 Gent, Belgium; (3) M. Abdel Wahab: Institute of Research and Development, Duy Tan University, 03 Quang Trung, Da Nang, Vietnam; (4) M. Abdel Wahab: Soete Laboratory, Faculty of Engineering and Architecture, Ghent University, Technologiepark Zwijnaarde 903, B-9052 Zwijnaarde, Belgium; (5) Huan X. Nguyen: London Digital Twin Research Centre, Faculty of Science and Technology, Middlesex University, London, UK; (6) G. De Roeck: Department of Civil Engineering, KU Leuven, B-3001 Leuven, Belgium.