Smart Structures and Systems

Volume 25, Number 1, 2020, pages 57-64

DOI: 10.12989/sss.2020.25.1.057

Experimental dynamic performance of an Aluminium-MRE shallow shell

Jiawei Zhang , Tanju Yildirim , Guru Prakash Neupane , Yuechuan Tao , Jiang Bingnong , Weihua Li

Abstract

The nonlinear dynamics of a directly forced clamped-clamped-free-free magneto-rheological elastomer (MRE) sandwich shell has been experimentally investigated. Experiments have been conducted on an aluminium shallow shell (shell A) and an MRE-aluminium sandwich shallow shell with single curvature (shell B). An electrodynamic shaker has been used to directly force shells A and B in the vicinity of their fundamental resonance frequency; a laser displacement sensor has been used to measure the vibration amplitude to construct the frequency-response curves. It was observed that for an aluminium shell (shell A), that at small forcing amplitudes, a weak softening-type nonlinear behaviour was observed, however, at higher forcing amplitudes the nonlinear dynamical behaviour shifted and a strong hardening-type response occurred. For the MRE shell (shell B), the effect of forcing amplitude showed softening at low magnetic fields and hardening for medium magnetic fields; it was also observed the mono-curved MRE sandwich shell changed dynamics to quasiperiodic displacement at some frequencies, from a periodic displacement. The presence of a magnetic field, initial curvature, and forcing amplitude has significant qualitative and quantitative effects on the nonlinear dynamical response of a mono curved MRE sandwich shell.

Key Words

shallow shell; experimentation; mechanics; nonlinear experiments; magneto-rheological elastomer

Address

(1) Jiawei Zhang, Yuechuan Tao: School of Electrical and Information Engineering, The University of Sydney, Sydney, NSW2006, Australia; (2) Tanju Yildirim, Guru Prakash Neupane: Research School of Electrical, Energy and Materials Engineering, College of Engineering and Computer Science, The Australian National University, Canberra, ACT 2601, Australia; (3) Jiang Bingnong: School of Mechanical and Mechatronic Engineering, University of Technology Sydney, Sydney NSW2007; (4) Weihua Li: School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong 2522, Australia.

PDF Viewer

Preview uses the same access rules as Full Text PDF (subscription, purchase, or open access).

Loading… Download PDF