Effects of temperature on the ratcheting behavior of pressurized 90 elbow pipe under force controlled cyclic loading

Xiaohui Chen, Xingang Wang and Xu Chen

Abstract

Ratcheting behavior of 90 elbow piping subject to internal pressure 20 MPa and reversed bending 20 kN was investigated using experimental method. The maximum ratcheting strain was found in the circumferential direction of intrados. Ratcheting strain at flanks was also very large. Moreover, the effect of temperature on ratcheting strain of 90 elbow piping was studied through finite element analysis, and the results were compared with room condition (25). The results revealed that ratcheting strain of 90 elbow piping increased with increasing temperature. Ratcheting boundary of 90 elbow piping was determined by Chaboche model combined with C-TDF method. The results revealed that there was no relationship between the dimensionless form of ratcheting boundary and temperature.

Key Words

elbow pipe; ratcheting strain; temperature; reversed bending; Chaboche model; ANSYS

Address

Xiaohui Chen: School of Control Engineering, Northeastern University, Qinhuangdao 066004, China; College of Mechanical Engineering, Yanshan University, Qinhuangdao, 066004, China Xingang Wang: School of Control Engineering, Northeastern University, Qinhuangdao 066004, China Xu Chen: School of Chemical Engineering and Technology, Tianjin University, 300072, China

← Back to Volume 19, No. 5