Structural Engineering and Mechanics
Volume 67, Number 3, 2018, pages 255-265
DOI: 10.12989/sem.2018.67.3.255
Prestress force effect on fundamental frequency and deflection shape of PCI beams
Marco Bonopera, Kuo-Chun Chang, Chun-Chung Chen, Yu-Chi Sung and Nerio Tullini
Abstract
The prestress force effect on the fundamental frequency and deflection shape of Prestressed Concrete I (PCI) beams was studied in this paper. Currently, due to the conflicts among existing theories, the analytical solution for properly considering the structural behavior of these prestressed members is not clear. A series of experiments were conducted on a large-scale PCI beam of high strength concrete with an eccentric straight unbonded tendon. Specifically, the simply supported PCI beam was subjected to free vibration and three-point bending tests with different prestress forces. Subsequently, the experimental data were compared with analytical results based on the Euler-Bernoulli beam theory. It was proved that the fundamental frequency of PCI beams is unaffected by the increasing applied prestress force, if the variation of the initial elastic modulus of concrete with time is considered. Vice versa, the relationship between the deflection shape and prestress force is well described by the magnification factor formula of the compression-softening theory assuming the secant elastic modulus.
Key Words
compression-softening theory; deflection shape; fundamental frequency; PCI beam; prestress force
Address
Marco Bonopera:
1) Bridge Engineering Division, National Center for Research on Earthquake Engineering, Taipei, Taiwan
2) Department of Engineering, University of Ferrara, Ferrara, Italy
Kuo-Chun Chang: Department of Civil Engineering, National Taiwan University, Taipei, Taiwan
Chun-Chung Chen: Bridge Engineering Division, National Center for Research on Earthquake Engineering, Taipei, Taiwan
Yu-Chi Sung:
1) Bridge Engineering Division, National Center for Research on Earthquake Engineering, Taipei, Taiwan
2) Department of Civil Engineering, National Taipei University of Technology, Taipei, Taiwan
Nerio Tullini: Department of Engineering, University of Ferrara, Ferrara, Italy