CONTENTS
Volume 70, Number 4, 2019
-
Mitigation of progressive collapse in steel structures using a new passive connection
Masoud Mirtaheri, Fereshteh Emami, Mohammad A. Zoghi and Mojtaba Salkhordeh
pages 381-394.
DOI: 10.12989/sem.2019.70.4.381
-
Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration
Ouahid Keblouti, Lakhdar Boulanouar, Mohamed W. Azizi and Abderrahim Bouziane
pages 395-405.
DOI: 10.12989/sem.2019.70.4.395
-
Influence of shear preload on wave propagation in small-scale plates with nanofibers
M.R. Farajpour, A.R. Shahidi and A. Farajpour
pages 407-420.
DOI: 10.12989/sem.2019.70.4.407
-
Modeling of the lateral stiffness of masonry infilled steel moment-resisting frames
Minas E. Lemonis, Panagiotis G. Asteris, Dimitrios G. Zitouniatis and Georgios D. Ntasis
pages 421-429.
DOI: 10.12989/sem.2019.70.4.421
-
Numerical studies of the failure modes of ring-stiffened cylinders under hydrostatic pressure
Teguh Muttaqie, Do Quang Thang, Aditya Rio Prabowo, Sang-Rai Cho and Jung Min Sohn
pages 431-443.
DOI: 10.12989/sem.2019.70.4.431
-
Concerning the tensor-based flexural formulation: Theory
Rajai Z. Al-Rousan, Mohammed A. Alhassan and Moheldeen A. Hejazi
pages 445-455.
DOI: 10.12989/sem.2019.70.4.445
-
Hierarchical neural network for damage detection using modal parameters
Minwoo Chang, Jae Kwan Kim and Joonhyeok Lee
pages 457-466.
DOI: 10.12989/sem.2019.70.4.457
-
Comparative study of the resistance of bonded, riveted and hybrid assemblies; Experimental and numerical analyses
M.C.Ezzine, K.Madani, M.Tarfaoui, S. Touzain and S. Mallarino
pages 467-477.
DOI: 10.12989/sem.2019.70.4.467
-
A study on the working mechanism of internal pressure of super-large cooling towers based on two-way coupling between wind and rain
Shitang Ke, Wenlin Yu and Yaojun Ge
pages 479-497.
DOI: 10.12989/sem.2019.70.4.479
-
Study on axial compressive behavior of quadruple C-channel built-up cold-formed steel columns
Shaofeng Nie, Tianhua Zhou, Fangfang Liao and Donghua Yang
pages 499-511.
DOI: 10.12989/sem.2019.70.4.499