CONTENTS
Volume 13, Number 1, 2014
-
Application of shear deformation theory for two dimensional electro-elastic analysis of a FGP cylinder
M. Arefi and G.H. Rahimi
pages 1-24.
DOI: 10.12989/sss.2014.13.1.001
-
Axisymmetric dynamic instability of polar orthotropic sandwich annular plate with ER damping treatment
Jia-Yi Yeh
pages 25-39.
DOI: 10.12989/sss.2014.13.1.025
-
Feasibility study on corrosion monitoring of a concrete column with central rebar using BOTDR
Yijie Sun, Bin Shi, Shen-en Chen, Honghu Zhu, Dan Zhang and Yi Lu
pages 41-53.
DOI: 10.12989/sss.2014.13.1.041
-
Serviceability-oriented analytical design of isolated liquid damper for the wind-induced vibration control of high-rise buildings
Zhipeng Zhao, Xiuyan Hu, Cong Liao, Na Hong and Yuanchen Tang
pages 27-39.
DOI: 10.12989/sss.2024.13.1.027
-
Finite element modeling and bending analysis of piezoelectric sandwich beam with debonded actuators
K. Venkata Rao, S. Raja and T. Munikenche Gowda
pages 055-80.
DOI: 10.12989/sss.2014.13.1.055
-
Predicting the buckling load of smart multilayer columns using soft computing tools
Yaser Shahbazi, Ehsan Delavari and Mohammad Reza Chenaghlou
pages 81-98.
DOI: 10.12989/sss.2014.13.1.081
-
Quantity vs. Quality in the Model Order Reduction (MOR) of a Linear System
Sara Casciati and Lucia Faravelli
pages 99-109.
DOI: 10.12989/sss.2014.13.1.099
-
3D buckling analysis of FGM sandwich plates under bi-axial compressive loads
Chih-Ping Wu and Wei-Lun Liu
pages 111-135.
DOI: 10.12989/sss.2014.13.1.111
-
Experimental identification of the six DOF C.G.S., Algeria, shaking table system
Abdelhalim Airouche, Hakim Bechtoula, Hassan Aknouche, Bradford K.Thoen and Djillali Benouar
pages 137-154.
DOI: 10.12989/sss.2014.13.1.137
-
Crack source location by acoustic emission monitoring method in RC strips during in-situ load test
Tala Shokri and Antonio Nanni
pages 155-171.
DOI: 10.12989/sss.2014.13.1.155