CONTENTS
Volume 12, Number 6, 2017
-
Seismic retrofitting of a tower with shear wall in UHPC based dune sand
Abderraouf Trabelsi, Zied Kammoun and Aouicha Beddey
pages 591-601.
DOI: 10.12989/eas.2017.12.6.591
-
Performance of hybrid beam-column joint cast with high strength concrete
M.A. Al-Osta, A.M. Al-Khatib, M.H. Baluch, A.K. Azad and M.K. Rahman
pages 603-617.
DOI: 10.12989/eas.2017.12.6.603
-
On Propagation of Love waves in dry sandy medium sandwiched between fiber-reinforced layer and prestressed porous half-space
Shishir Gupta and Mostaid Ahmed
pages 619-628.
DOI: 10.12989/eas.2017.12.6.619
-
Seismic analysis of turbo machinery foundation: Shaking table test and computational modeling
Sungyani Tripathy and Dr. Atul K Desai
pages 629-641.
DOI: 10.12989/eas.2017.12.6.629
-
Evaluation of ductility and response modification factor in moment-resisting steel frames with CFT columns
Seyed Sh. Hashemi, Kabir Sadeghi, Mohammad Vaghefi and Kaveh Shayan
pages 643-652.
DOI: 10.12989/eas.2017.12.6.643
-
Bayesian-based seismic margin assessment approach: Application to research reactor
Shinyoung Kwag, Jinho Oh, Jong-Min Lee and Jeong-Soo Ryu
pages 653-663.
DOI: 10.12989/eas.2017.12.6.653
-
Study on the bearing capacity of cold-formed steel under different boundary conditions in transmission towers
Junke Han, Xu Zhao, Zhenyun Tang, Hua Ma and Zhenbao Li
pages 665-672.
DOI: 10.12989/eas.2017.12.6.665
-
Three-dimensional structural health monitoring based on multiscale cross-sample entropy
Tzu Kang Lin, Tzu Chi Tseng and Ana G. Laínez
pages 673-687.
DOI: 10.12989/eas.2017.12.6.673
-
OMA of model steel structure retrofitted with CFRP using earthquake simulator
Azer A. Kas
pages 689-697.
DOI: 10.12989/eas.2017.12.6.689
-
Experimental and analytical evaluation of a low-cost seismic retrofitting method for masonry-infilled non-ductile RC frames
Jarun Srechai, Sutat Leelataviwat, Arnon Wongkaew and Panitan Lukkunaprasit
pages 699-712.
DOI: 10.12989/eas.2017.12.6.699
-
An investigation of seismic parameters of low yield strength steel plate shear walls
Negin Soltani, Karim Abedi, Mehdi Poursha and Hassan Golabi
pages 713-723.
DOI: 10.12989/eas.2017.12.6.713