CONTENTS
Volume 25, Number 1, 2020
-
GS-MARS method for predicting the ultimate load-carrying capacity of rectangular CFST columns under eccentric loading
Nguyen-Vu Luat, Jaehong Lee, Do Hyung Lee and Kihak Lee
pages 1-14.
DOI: 10.12989/cac.2020.25.1.001
-
Monitoring of fracture propagation in brittle materials using acoustic emission techniques-A review
Hamid Reza Nejati, Amin Nazerigivi, Mehrdad Imani and Ali Karrech
pages 15-27.
DOI: 10.12989/cac.2020.25.1.015
-
Modeling refractory concrete lining of fluid catalytic cracking units of oil refineries
Ana B.C.G. Silva, Henrique C.C. Andrade, Eduardo M.R. Fairbairn, Jose C.F. Telles, Fernando L.B. Ribeiro, Romildo D. Toledo-Filho and Jorivaldo Medeiros
pages 29-36.
DOI: 10.12989/cac.2020.25.1.029
-
A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis
Miloud Kaddari, Abdelhakim Kaci, Abdelmoumen Anis Bousahla, Abdelouahed Tounsi, Fouad Bourada, AbdeldjebbarTounsi, E.A. Adda Bedia and Mohammed A. Al-Osta
pages 37-57.
DOI: 10.12989/cac.2020.25.1.037
-
Effect of fine fillers from industrial waste and various chemical additives on the placeability of self-compacting concrete
Yelbek Utepov, Daniyar Akhmetov and Ilnur Akhmatshaeva
pages 59-65.
DOI: 10.12989/cac.2020.25.1.059
-
Computer aided failure prediction of reinforced concrete beam
A.B.M. Saiful Islam
pages 67-73.
DOI: 10.12989/cac.2020.25.1.067
-
Flexural and shear behavior of large diameter PHC pile reinforced by rebar and infilled concrete
Jin-Wook Bang, Bang-Yeon Lee and Yun-Yong Kim
pages 75-81.
DOI: 10.12989/cac.2020.25.1.075
-
Prediction of fly ash concrete compressive strengths using soft computing techniques
Rajeshwari Ramachandra and Sukomal Mandal
pages 83-94.
DOI: 10.12989/cac.2020.25.1.083