Advances in Computational Design

CONTENTS

Volume 4, Number 3, 2019

• Synthesis of four-bar linkage motion generation using optimization algorithms

  Wisanu Phukaokaew, Suwin Sleesongsom, Natee Panagant and Sujin Bureerat

  Abstract | Full Text (1K)

  pages 197-210.

  DOI: 10.12989/acd.2019.4.3.197

• Numerical modeling of an orthotropic RC slab band system using the Barcelona model

  Pawel G. Kossakowski and Izabela Uzarska

  Abstract | Full Text (1K)

  pages 211-221.

  DOI: 10.12989/acd.2019.4.3.211

• Investigation of design values computation of wood shear walls constructed with structural foam sheathing

  Shideh Shadravan and Chris C. Ramseyer

  Abstract | Full Text (1K)

  pages 223-238.

  DOI: 10.12989/acd.2019.4.3.223

• Effects of temperature on the evolution of stresses at the stem cement interface

  Djafar Ait Kaci, Abdelmadjid Moulgada, Habib Achache and Noureddine Bounoua

  Abstract | Full Text (1K)

  pages 239-250.

  DOI: 10.12989/acd.2019.4.3.239

• Comparison of structural foam sheathing and oriented strand board panels of shear walls under lateral load

  Shideh Shadravan, Chris C. Ramseyer and Royce W. Floyd

  Abstract | Full Text (1K)

  pages 251-272.

  DOI: 10.12989/acd.2019.4.3.251

• Optimal design for the reinforced concrete circular isolated footings

  Sandra López-Chavarría, Arnulfo Luévanos-Rojas, Manuel Medina-Elizondo, Ricardo Sandoval-Rivas and Francisco Velázquez-Santillán

  Abstract | Full Text (2K)

  pages 273-294.

  DOI: 10.12989/acd.2019.4.3.273

• Initiation and propagation of a crack in the orthopedic cement of a THR using XFEM

  Bachir Gasmi, Sahli Abderrahmene, Benbarek Smail and Aour Benaoumeur

  Abstract | Full Text (1K)

  pages 295-305.

  DOI: 10.12989/acd.2019.4.3.295

• A low computational cost method for vibration analysis of rectangular plates subjected to moving sprung masses

  Ali Nikkhoo, Soheil Asili, Shabnam Sadigh, Iman Hajirasouliha and Hossein Karegar

  Abstract | Full Text (1K)

  pages 307-326.

  DOI: 10.12989/acd.2019.4.3.307